Analysis of common problems of pillow packing machine

1. The cut position deviates from the color standard.

2. Cut the knife on the product.

3. Wrinkle marks appear on the seal.

4. Weak sealing or leakage sealing.

The thermometer does not control the temperature.

Ii. Analysis of common faults of pillow packing machine

1. The color label tracking is not opened, the color of the film color label is too light, and the film drive is skidding.

2. The push rod is not synchronized with the cutting tool, the tool base is too high or too low, and the packaging speed is too fast.

3. The temperature is too high, the speed is too slow, and the heat resistance of the outer coating is poor.

4. The temperature is too low, the speed is too fast, and the inner layer of the capsule has poor thermal sealing property.

5. Heating element damage, solid state relay burn out, thermocouple damage, temperature control meter damage.


星空体育·(中国)官方网站